9.6. Replacement of the drive of a speedometer

 PERFORMANCE ORDER

Work is carried out on a viewing ditch or the elevator.

Key "on 13" we turn off a bolt of a collar of fastening of a reception pipe of the muffler to the transmission.

We turn off a nut of fastening of a flexible shaft of the drive of a speedometer.

Key "on 10" we turn off a nut of fastening of the drive.

Key "on 13" we turn off two nuts of fastening of a cross-piece to a body.

We lower a back part of the transmission that hairpins left cross-piece openings.

Piece of a pipe we displace the transmission to the right and we take out the speedometer drive from a case opening.

The new drive is installed in the sequence, the return to removal.
For replacement of a flexible shaft we disconnect the top fastening of a cable of the drive from a speedometer (see Removal of a combination of devices) and we take out it from an opening of the forward panel of a body.