3.19. Replacement of laying of a cover of a head of the block of cylinders

 PERFORMANCE ORDER

We remove from the carburetor the case of the air filter (see Replacement of the carburetor).

By the thin screw-driver it is hooked and we remove a spring bracket...

... also we disconnect draft from the roller of the drive of a butterfly valve.

By the screw-driver it is hooked and we disconnect draft of the drive of a butterfly valve from the carburetor (see Replacement of the carburetor).

By the screw-driver it is hooked and we remove a lock spring washer of the lever.

We remove from an axis the lever together with drafts.

We remove a fuel hose of the carburetor from an arm.

Key "on 10" we turn off eight nuts of fastening of a cover of a head of the block of cylinders...

... also we remove special washers from hairpins.

We unclench the holder and we release a hose of the vacuum amplifier of brakes and a plait of wires.

We uncover block heads...

... and laying of a cover.

Order of tightening of nuts of fastening of a cover of a head of the block of engines 2103, 2106.

Having replaced laying, we establish a cover in the return sequence, tightening bolts in the order specified in the drawing.