VAZ:: 2106: Replacement of a gear wheel of the drive of the oil pump

1. General information
2. Diagnostics of malfunctions
3. Engine
- 3.1. Head of cylinders and mechanism of gas distribution
- 3.2. Lubrication system
- 3.3. Oil replacement
- 3.4. Replacement of an uspokoitel of a chain of the drive of the camshaft
- 3.5. Replacement of the camshaft and levers of valves
- 3.6. Replacement of maslootrazhatelny caps of the mechanism of gas distribution
- 3.7. Replacement of laying of inlet and final collectors
- 3.8. Replacement of laying of a head of the block of cylinders
- 3.9. Dismantling of a head of the block of cylinders, grinding in of valves
- 3.10. Replacement of a forward cuff of a bent shaft
- 3.11. Removal and dismantling of the oil pump
- 3.12. Removal of an oil separator of system of ventilation of a case
- 3.13. Replacement of a natyazhitel of a chain of the drive of the camshaft
- 3.14. Replacement of a gear wheel of the drive of the oil pump
- 3.15. Replacement of a chain of the drive of the camshaft
- 3.16. Replacement of the roller of the drive of auxiliary units
- 3.17. Replacement of a back cuff of a bent shaft
- 3.18. Dismantling of a bent shaft
- 3.19. Replacement of laying of a cover of a head of the block of cylinders
- 3.20. Replacement of the piston
- 3.21. Adjustment of a gap between levers and cams of the camshaft
- 3.22. Replacement of inserts of a bent shaft
- 3.23. Replacement of a pillow of a support of the engine
- 3.24. Replacement of the pallet of a case
- 3.25. The sizes of the main interfaced details of the engine and limits of admissible iznos in operation
4. Engine power supply system
5. Carburetor
6. Engine cooling system
7. System of production of the fulfilled gases
8. Coupling
9. Transmission
10. Cardan transfer
11. Zadny Bridge
12. Forward suspension bracket
13. Back suspension bracket
14. Steering
15. Brake system
16. Electric equipment
17. Body
18. System of heating and ventilation
19. Care of a car body
20. Appendices

3.14. Replacement of a gear wheel of the drive of the oil pump

PERFORMANCE ORDER

We remove the ignition distributor (see Replacement of the distributor of ignition).

We press an aluminum or wooden mandrel in a shlitsevy opening of a gear wheel. The mandrel has to come into an opening with a small tightness. Having pulled for a mandrel, we take a gear wheel from the block of cylinders.

We establish a new gear wheel into place in the same way.

ATTENTION! Be careful, do not drop a gear wheel in the block of cylinders.