3.10. Replacement of a forward cuff of a bent shaft


We take off a generator drive belt (see Replacement of a belt of the drive of the generator).

We include transfer and the parking brake then a key "on 38" we turn off a nut of fastening of a pulley of a bent shaft.

Assembly shovel we wring out a pulley of a bent shaft from a forward cover...

... also we remove a pulley.

We hook the screw-driver a forward cuff of a bent shaft...

... also we take it from a cover.

Having oiled engine a working edge of a new cuff, we press it in a cover, using an old cuff as a mandrel.

We establish a pulley in the return sequence. At the same time we watch that the spline of a bent shaft got to a pulley groove.