2.6.8. Sound signal
|
Cause of defect |
Elimination method |
|
The signal does not work
| |
| The signal, its switch, the relay are faulty, the safety lock fused, wires are damaged, their tips are oxidized or badly connected | If tension on a signal moves, try to restore sounding, turning the screw on the signal case. Smooth out, press out tips of wires. Replace a faulty signal, the switch, the relay, wires, the fused safety lock |
|
Weak or hoarse sound of a signal
|
|
| The signal, the relay are faulty, wires are damaged, their tips are oxidized or badly connected | Try to adjust sounding, turning the screw on the signal case. Smooth out, press out tips of wires. Replace a faulty signal, the switch, the relay, wires |