16.9.6. Removal of the generator

 PERFORMANCE ORDER

It is more convenient to carry out work on a viewing ditch or the elevator.
For descriptive reasons a part of operations is shown on the generator removed from the engine or with the removed engine details.
We disconnect the plug from a conclusion "67" generators (see Replacement of brushes of the generator).

We disconnect the plug from a conclusion of a "zero" wire.

Having shifted an insulating cover, a key "on 10" we turn off a nut of fastening of wires on a conclusion "30" generators and we disconnect wires.

We take off a drive belt from a generator pulley (see Replacement of a belt of the drive of the generator).

Key "on 17" we turn off two nuts and we remove an adjusting level.

Having turned off a nut of the lower fastening of the generator (see Replacement of a belt of the drive of the generator)...

... we take out a bolt and the plug. The generator will keep at the same time on an arm.

We remove the generator from the car, having lowered it between an arm and a beam of the forward bridge.

We install the generator on the car as it should be, the return to removal. After installation we regulate a drive belt tension (see Replacement of a belt of the drive of the generator).