16.15.9. Replacement of the sensor of a signaling device of insufficient level of brake fluid

 PERFORMANCE ORDER

At the insufficient level of brake fluid in the main brake cylinder contacts of the sensor installed in a tank cover become isolated, and on a guard of devices the signaling device lamp lights up. For check of serviceability of the sensor it is enough to press on the axis acting from a tank cover. If the lamp does not burn...

… we disconnect wires from conclusions of the sensor and at the included ignition we short-circuit them.

The signaling device does not burn – we change a faulty lamp (see Replacement of a lamp of a signaling device of insufficient level of brake fluid), and lit up – the sensor is faulty. The faulty sensor is changed assembled with a cover.

We turn off a cover of a tank and we take out the sensor.

We wrap a cover with the new sensor and we connect wires.