12.3. Replacement of pillows and bar of the stabilizer


ATTENTION! Compression of springs of the left and right side of a forward suspension bracket has to be identical. Otherwise the twirled bar, having straightened, can put a trauma.

It is more convenient to change pillows when the car costs on wheels.

Key "on 13" we turn off two nuts of fastening of a bracket of a pillow to the lower lever.

Before removal it is marked the top part of a bracket correctly to establish it back.

Assembly shovel we wring out the end of a bar and we put a new pillow, previously having moistened its opening with soap solution. We establish a pillow so that its ledge got to an opening in a bracket.

At deformation of a bar of the stabilizer or at strong wear from contact with pillows it should be replaced. For this purpose we remove a mudguard of the engine and a bracket of fastening of pillows.

Head "on 8" we unscrew 12 self-tapping screws of fastening of a mudguard.

We remove brackets of fastening of the ends of a bar to the lower levers of a suspension bracket.

Head "on 13" we turn off two nuts of fastening of two arms of a bar to longerons from below of a motor compartment and …

… we remove a bar with fastening arms.

We establish a stabilizer bar upside-down.