12.12.1. Adjustment of a longitudinal tilt angle of an axis of turn

Template for adjustment of a longitudinal tilt angle of an axis of turn.


 PERFORMANCE ORDER

The corner is regulated by change of quantity of adjusting washers on bolts of fastening of an axis of the lower lever.
So, shift of one washer 0,5 mm thick from a forward package in back gives increase in a longitudinal corner on 36-40', at the same time disorder of a wheel decreases on 7–9' and vice versa.
On sale there are adjusting P-shaped washers 0,5 and 0,8 mm thick. Surely we establish these washers by a cut down.
It is possible to measure a longitudinal tilt angle of an axis of turn by means of a self-made template with a plumb. On a template the sector in which at the correct adjustment there has to be a plumb thread is noted.

Dovorachivayem of a nut on fingers of spherical hinges so that their sides became perpendicular the longitudinal plane of the car, and we put to them a template.

ATTENTION! The difference of values of longitudinal tilt angles of an axis of turn between the right and left wheels should not exceed 30'.