For removal of a cross-piece we hang out a forward part of the car and we remove wheels, a stabilizer bar, shock-absorbers, springs and we disconnect from a cross-piece the lower levers (see appropriate sections).
|
In podkapotny space by a face key "on 13" with Cardan it is turned off two nuts of fastening of the engine to suspension bracket pillows. |
|
Having fixed a strong rope (cable) on the right side to an assembly eye, and with left – to an engine support, we suspend it on an auxiliary beam (scrap, a steel pipe) and slightly we raise. |
|
Key "on 19" we turn off bolts of fastening of a cross-piece from outer side of forward longerons (details of a suspension bracket are removed for descriptive reasons). |
|
Head "on 19" we turn off nuts from four hairpins of fastening of a cross-piece to longerons. |
We remove a cross-piece together with support of fastening of the engine down. We establish a cross-piece as it should be, the return to removal. We establish the removed knots and details of a suspension bracket as it should be, the return to removal. |