Work is carried out on a viewing ditch or the elevator. We disconnect an ottyazhny spring of a back cable of the parking brake (see Removal of knots and adjustment of the parking brake system).
|
We put with a tag chisel to the place of a driveshaft joint with a flange of the leading gear wheel of the main transfer. A key "on 13" we turn off four самоконтрящиеся nuts, holding the driveshaft from a pro-collar the big screw-driver. |
|
We separate a joint of flanges. |
|
We mark the mutual provision of a shaft and the aligning flange of the elastic coupling. |
|
By pricker it is unbent four lock short moustaches on a consolidation holder about the elastic coupling … |
|
… also we shift it together with consolidation towards the driveshaft. |
|
Head "on 13" we turn off two nuts and we remove a safety arm. |
|
Holding cardan transfer, a key "on 13" we turn off two nuts and we remove a cross-piece of an intermediate support from hairpins of its fastening to a body. |
The cross-piece of an elastic support is fixed on a body through rubber washers.
|
We put forward the driveshaft from shlitsevy connection with the elastic coupling and we remove it. |
We establish cardan transfer as it should be, the return to removal, having greased shlitsevy connections with Fiol-1 lubricant, Fiol-2U or SHRUS-4 and having combined the tags made earlier.
|
After installation of a shlitsevy part of the driveshaft in the plug of the aligning flange of the elastic coupling we collect a holder. One screw-driver we shift a consolidation holder forward, and another in turn we bend its lock short moustaches. |
|