1. General information
|
|
VAZ-2106 and its modifications – five-seater cars with a forward arrangement of the engine and back driving wheels. A body – the bearing design, all-metal, welded. Body type – the sedan.
Engines – four-cylinder, line, four-cycle, petrol (VAZ-21061, VAZ-21065-01) with a working volume of 1,5 l or 1,6 l (VAZ-2106, VAZ-21065-00) and power (in accordance with GOST 14846) respectively 71,4 and 74,5 h.p.
The VAZ-2106 and VAZ-21061 cars are completed with four-speed transmissions. At the VAZ-21065-00 and VAZ-21065-01 cars the five-speed transmission and contactless system of ignition.
The design of cars as of September, 2001 is reflected in a practical part of the book.
Technical characteristics of cars
Parameters |
VAZ-21061 (VAZ-21065-01) |
VAZ-2106 (VAZ-21065-00) |
The mass of the equipped car, kg |
1045 |
1045 |
Payload, kg |
400 |
400 |
The allowed maximum weight, kg |
1445 |
1445 |
Road gleam of the car with the allowed maximum weight, with tires 175/70R13 (165/80R13), not less, than a mm: | ||
to a cross-piece of a forward suspension bracket |
175 |
175 |
to a beam of the back bridge |
170 |
170 |
to the engine case pallet |
182 |
182 |
The admissible mass of freight on an additional (top) luggage carrier, kg |
50 |
50 |
Maximum speed *, km/h: | ||
with the allowed maximum weight |
148 |
150 |
with the driver and the passenger |
150 |
152 |
Dispersal time from the place to the speed of 100 km/h, with: | ||
with the driver and one passenger |
17 |
16 |
with the allowed maximum weight |
19 |
17,5 |
Fuel consumption * on 100 km of a way, no more, than a l: | ||
at a speed of 90 km/h |
7,4 |
7,4 |
at a speed of 120 km/h |
10,1 |
10,1 |
at a city motion cycle |
9,9 |
10,3 |
The smallest radius of turn on a trace of an external forward wheel, m |
5,6 |
5,6 |
The greatest rise overcome by the car with a full weight without dispersal on the first transfer, % |
36 |
36 |
Brake way of the car with full loading |
|
|
at emergency brake application from the speed of 80 km/h, no more, than a m |
43,2 |
43,2 |
* It is measured by a special technique, at the four-speed transmission.
Engines
Parameters |
VAZ-2103 |
VAZ-2106 |
Number and arrangement of cylinders |
4, in a row |
4, in a row |
Power supply system |
Carburetor |
Carburetor |
Fuel |
A-91, AI-93 gasoline |
A-91, AI-93 gasoline |
Diameter of cylinders and piston stroke, mm |
76і80 |
79і80 |
Operating procedure of cylinders |
1–3–4–2 |
1–3–4–2 |
Extent of compression |
8,5 |
8,5 |
Working volume, l |
1,45 |
1,57 |
Rated power, not less: | ||
|
52,5 |
54,8 |
|
52,5(71,4) |
54,8(74,5) |
Frequency of rotation of a bent shaft at the rated power, min. –1 |
5600 |
5400 |
The maximum torque with a frequency of rotation of a bent shaft of 3400 min. –1 for the mines engine 2103 or 3000-1 for the engine 2106, N. of m |
103,9 |
116 |
Minimum frequency of rotation of a bent shaft, mines –1 |
850–900 |
850–900 |
The direction of rotation of a bent shaft from a pulley |
Right |
Right |
Lubrication system |
Combined, under pressure and spraying
| |
Cooling system |
Liquid, closed, with compulsory circulation
| |
System of ventilation of a case |
Compulsory, with a conclusion of crankcase gases in the inlet pipeline |
Transmission
Coupling |
One-disk, dry, with the hydraulic drive of switching off and the central diaphragm spring |
Transmission |
Mechanical, four - or five-step, three-running, with synchronizers on all transfers of the forward course |
Transfer numbers on transfers: | |
|
3,67 |
|
2,1 |
|
1,36 |
|
1 |
|
0,82 |
|
3,53 |
Cardan transfer |
Two-shaft, with an intermediate support and the elastic coupling |
Main transfer |
Gipoidny, transfer number – 4,1 or 3,9 |
Differential |
Conic, two-satellite |
Running gear
Forward suspension bracket |
Independent, spring, on cross levers with the stabilizer of cross stability |
Back suspension bracket |
The dependent, spring, rigid beam is connected to a body of one cross and four longitudinal bars |
Shock-absorbers |
Hydraulic, telescopic, bilateral action |
Wheel rim size |
127J-330 (5J-13) |
Tires: | |
|
Radial, tubeless or chamber |
|
175/70R13 or 165/80R13 (165/70R13 **) |
Steering
Type of the steering mechanism |
Globoidalny worm – dvukhgrebnevy a roller, transfer number – 16,4 |
Steering drive | Three-unit (drafts with spherical hinges) with a bipod, pendular and rotary levers |
Steering column | With the anti-theft device integrated with the ignition switch |
Brake system
Working brake system: | |
|
Disk, with a two-piston bracket |
|
Drum, kolodochny, with one working cylinder and two pistons |
Drive of the working brake system |
Foot, hydraulic, double-circuit, with the vacuum amplifier, the regulator of pressure of back brakes and the sensor of insufficient level of brake fluid |
Brake mechanisms of the parking brake system |
Drum, kolodochny on back wheels |
Drive of the parking brake system |
Mechanical, hummock, manual from the lever installed between front seats |
Electric equipment
Scheme type |
Single-wire, with minus on "weight" (a body and the power unit of the car) |
The rated voltage of onboard network, In |
12 |
Tension in onboard network at the working engine, In |
13,4–14,7 |
Rechargeable battery |
Starter, with a capacity not less than 55 Ah at the 20-hour mode of the category |
Generator |
G-221 of alternating current with the built-in rectifier; return current – 42 A with a frequency of rotation of 5000 min. of-1 |
Starter |
ST-221 or 35.3708, a direct current, with remote control and the coupling of a free wheeling, power is 1,3 kW |
Spark plugs |
A17DVR, A17DVRM or FE65CPR with a carving of M14x1,25 |
** For the five-speed transmission.
** For BL-85 model tires the useful mass of the car has to be reduced by 70 kg.
Passport data of the car
The model and number of the car, engine model, weight data, number for spare parts, options of execution and a complete set are specified in the summary plate of factory data.
The second line from above contains a mark of conformity and number of approval like the vehicle.
The third line in the plate – identification number – is deciphered as follows: the first three symbols according to the international standards designate a code of manufacturer; six following figures – car model; a letter of the Latin alphabet (or figure) – model year of release of the car; the last seven figures – number of the chassis, for the car corresponding to number of a body.
|
Identification number of the engine (on the left side of the block of cylinders) |
|
Identification number of a body(bodies) and the plate of factory data (the forward panel under a cowl on the right) |
|
Summary plate of factory data |
Figures in columns designate:
Е – full admissible mass of the car;
F – admissible weight with the trailer;
G – a permissible load on a forward axis;
N – a permissible load on a back axis.
In the lower line the option of execution and a complete set are specified.
Number for spare parts corresponds to serial number of an exit of the car from the conveyor.
The model and number of the engine are beaten out on inflow of the block of cylinders to the left of the fuel pump.
Identification number is duplicated on the lower shelf of a box of airinflow and on a connector of the left arch of a back wheel.